enable writing over existing data will result in the media becoming permanently write protected. It will still
be readable in a WORM drive, depending upon the severity of the tampering, but no further data can be
appended to the cartridge.
WORM data cartridges are clearly identified by their distinctive, two-tone cartridge color. They can only be
used with LTO Ultrium tape drives that support the WORM feature.
To verify that your backup or archive software application supports WORM cartridges, see the HPE Data
Availability, Protection, and Retention Compatibility Matrix at: http://hpe.com/storage/
DAPRcompatibility
For information on how your Hewlett Packard Enterprise LTO Ultrium tape drive and WORM cartridge can
help your business meet Information Lifecycle Management and regulatory compliance requirements, see
the Hewlett Packard Enterprise Business Support Center at: http://www.hpe.com/storage
Caring for media
Many tape drive and backup failures are caused by damaged or improperly handled tape cartridges.
• Keep the cartridge in the case provided.
• Store and transport cartridges in the vertical orientation.
• Follow the temperature, humidity, and acclimatization guidelines on the cartridge packaging.
• Avoid dropping the cartridge or handling it roughly because doing so is likely to damage the cartridge.
• Inspect cartridges regularly for damage.
• Do not exceed the normal cartridge life.
Using the cartridge write-protect switch
1. Write-protect switch
Close the write protect switch (1) to protect the data on the tape. When locked, a padlock will be visible
on the switch.
20 Operating the tape drive
To Next Page
Loading...
