Setting menu
SET PWR
CH+
CH-
MUTE
DSP
V+
V-
power on/off
rolloff fast
rollff slow
filter band
-47kHz
-50kHz
-60kHz
-70kHz
setting menu
save actual volum
as starup level
exit from
setting menu
L-R chanel
Use the remote control to set and remember settings such as:
Volume,
input,
left-channel right channel,
filter modes,
filter frequencies.
Using:
1. On the remote control, press: SET, LCD display text: settings.
Setting
2. Press the install options button:
a, V +, V-: filter selection.
b, DSP: island left channel and right channel output (L-R)
c, CH +, Ch-: select the filter frequency.
When the installation is complete, press the button: Mute to save all the settings, and press
the SET button to exit the program.
Then, restart the DAC, and play the music!
Thank you!
Control guide
DAC ES9038 PRO
Andrea Ciuffoli-Quang Hao
10
To Next Page
Loading...