To Next PageTo Next Page
Need help?Do you have a question about the HRS GT36 and is the answer not in the manual?
Step-by-step instructions for terminating coaxial cable, crimping terminals, and securing connections. Relevance: 0.7
Describes how to measure crimping height for center terminals using a micrometer. Relevance: 0.7
Describes how to measure crimping height for outer terminals using a micrometer. Relevance: 0.7
Describes how to measure core barrel crimping width using a micrometer. Relevance: 0.7
Explains the procedure for testing tensile strength of crimped parts. Relevance: 0.7
Table detailing L1, L2, L3 strip dimensions for various terminals. Relevance: 0.7
Lists applicable cables and quality standards like crimping position, twisting, and bending. Relevance: 0.7
Details rolling, crimp burr height, bell mouth, cutoff tab, and side bell mouth standards. Relevance: 0.7
Details bending, rolling, crimp burr height, and bell mouth standards. Relevance: 0.7
Lists applicable cables and quality standards for crimping position, bending, twisting, and rolling. Relevance: 0.7
Details checks for appearance, withstand voltage, insulation resistance, and conduction. Relevance: 0.8
General| Number of Contacts | 36 |
|---|---|
| Contact Gender | Male |
| Shell Plating | Nickel |
| Contact Plating | Gold |
| Current Rating | 3 A |
| Voltage Rating | 250 V |
| Durability | 500 Cycles |
| Shielded | Yes |
| Manufacturer | Hirose Electric |
