Getting Connected 107
To connect to a wireless network
1. Open the Comm Manager.
2. Tap the WLAN button to turn on/off the wireless function. The WLAN
icon indicates the wireless status.
: Wi-Fi is turned on.
: Wi-Fi is turned off.
3. After Wi-Fi has been turned on, your device then scans for available
wireless networks in your area. The network names of the detected
wireless networks will be displayed on a pop-up message window.
Tap the desired wireless LAN, then tap OK.
4. On the next pop-up message window, tap The Internet if the wireless
LAN connects your device to the Internet. Otherwise, tap Work if the
wireless LAN connects your device to a private network.
5. If the wireless LAN is secured by a network key, enter this key, then
tap Connect.
To Next Page
Loading...