ISO (photo mode
only)
Choose an ISO level or set it back to Auto. Higher
ISO numbers are better for taking pictures in low
light conditions.
Resolution (photo
mode only)
Choose a photo resolution to use.
Review duration Set the time for a captured photo or video to be
displayed on the Review screen before the
camera changes back to the Viewfinder screen.
Widescreen (photo
mode only)
When this check box is selected (default), photo
resolutions available for selection are in 5:3 ratio
and you can use the entire Viewfinder screen to
frame your subject. When not selected, photo
resolutions available for selection are in standard
4:3 ratio.
Geo-tag photos
(photo mode only)
Select to store GPS location in your captured
photos.
Auto enhance (photo
mode only)
Select to reduce noise when using a high ISO
setting and to automatically adjust photo
brightness.
Auto focus (photo
mode only)
Enables or disables centered auto focus.
Face detection
(photo mode only)
Select to automatically recognize faces and adjust
the focus when you take people photos. Face
detection will be turned off if you disable auto
focus.
Shutter sound Select to play a sound when you press the shutter
release or record button.
124 Camera
To Next Page
Loading...
