3. Tap Wi-Fi settings.
Detected Wi-Fi networks will be listed in the Wi-Fi networks
section.
If the wireless network that you want is not listed, tap Add Wi-Fi
network to manually add it.
4. Tap the Wi-Fi network you want to connect to.
If you selected a secured network, you'll be asked to enter the
network key or password.
5. Tap Connect.
When HTC Rhyme is connected to the wireless network, the Wi-Fi icon
appears in the status bar and tells you the approximate signal strength
(number of bands that light up).
The next time HTC Rhyme connects to a previously accessed secured
wireless network, you won’t be asked to enter the key or other security
information again, unless you reset HTC Rhyme to its factory default
settings.
Connecting to a Wi-Fi network with EAP-TLS security
You may need to install a network certificate (*.p12) to HTC Rhyme before
you can connect to a Wi-Fi network with EAP-TLS authentication protocol.
1. Save the certificate file to the root folder of the storage card.
2. From the Home screen, press MENU , and then tap Settings >
Security.
Internet connections 295
To Next Page
Loading...
