5. When you see the name of your headset in the Available Devices section, tap
the name.
6. HTC Sensation XL with Beats Audio automatically tries to pair with the headset.
7. If automatic pairing fails, enter the passcode supplied with your headset.
The pairing and connection status is displayed below the hands-free headset or car kit
name in the Bluetooth devices section. When the Bluetooth headset or car kit is
connected to HTC Sensation XL with Beats Audio, the Bluetooth connected icon is
displayed in the status bar.
Reconnecting a headset or car kit
Normally, you can easily reconnect your headset by switching on Bluetooth on HTC
Sensation XL with Beats Audio, and then turning on the headset. However, you might
have to connect manually if your headset has been used with another Bluetooth
device.
Make sure that the headset is discoverable. Refer to the headset manual for details.
1. From the Home screen, press , and then tap Settings.
2. If Bluetooth is off, tap the Bluetooth On/Off switch to turn it on.
3. Tap Bluetooth. The Bluetooth screen opens.
4. Tap the headset’s name in the Paired devices section.
5. If prompted to enter a passcode, try 0000 or 1234, or consult the headset/car
kit documentation to find the passcode.
If you still cannot reconnect to the headset or car kit, follow the instructions in
Unpairing from a Bluetooth device on page 161, and then follow the steps under
Connecting a Bluetooth headset or car kit on page 159.
Disconnecting or unpairing from a Bluetooth
device
Disconnecting a Bluetooth device
1. From the Home screen, press , and then tap Settings.
2. Tap Bluetooth. The Bluetooth screen opens.
3. In the Paired devices section, tap name of the device to disconnect.
4. Tap OK.
Tap the name of the device to reconnect it.
160 Bluetooth
To Next Page
Loading...
