Step three: Connecting the power
Connect back the power supply to the VIVE streaming box.
4.
Router installation instructions
Step one: Connect the router power adapter and confirm that the power
indicator at the front of the panel is on.
Step two: If the PC is connected to the network via the Ethernet port,
disconnect the cable from the PC Ethernet port and connect it to the router’ s
WAN port. Connect the LAN port of the router to the PC through the supplied
network cable, as shown in the figure.
Step three: In the PC’s network connection settings in a Windows system,
select “Local connection” to connect the router, and change the connection
of the TCP/IP Settings to automatically obtain an IP address and DNS server
address.
Note: Use the router as is, DO NOT modify the router’ s settings.
DO NOT restore the factory default settings. To optimize the user experience, it is
recommended to place the router in an
open location without obstacles, with a 90 -degree antenna. Avoid putting the router under a
desk, behind a computer case, or in
any other enclosed environment.
To Next Page
Loading...