Step three: Cable connection
① Plug the 1-C USB plug of the long connection cable and the 2-B HDMI plug of
the short connection cable into the USB port and the HDMI port of the receiver
respectively.
② Reconnect the strap to the compartment cover.
③ Thread the 1-a and 1-b interfaces of the long connection cable
through the compartment cover cable port, and the 2-a interface of the
short connection cable.
④Next, plug in the four interfaces into the VIVE HMD power port, USB port,
HDMI port and audio connector port.
To Next Page
Loading...