Removing the microSD card
Make sure to unmount your microSD card before removing it. See Unmounting the storage card
on page 20.
1. Hold the phone face up.
2. Insert the tip of the tray eject tool that came with your phone—or a small bent paperclip—
into the tray eject hole.
Do not insert the tip of the tray eject tool into the microphone hole. This may damage the water-
resistant microphone mesh and invalidate the warranty.
3. Push the tip all the way into the hole until the tray ejects.
4. Pull the tray out, and remove the microSD card.
5. To reinsert the tray, center it first in the slot, and then slide it all the way in.
6. Make sure the tray is fully inserted and doesn't protrude from the slot.
21 Unboxing and setup
To Next Page
Loading...
