Updating base station firmware via cable connection
The hardware may be purchased separately from the Accessories tab on www.vive.com/
product/.
1. From your computer, open the SteamVR app.
2. If you see the icon, mouse over it to check if the firmware is out of date. If so, click
Update base station firmware.
3. Unplug the base stations from their power adapters, and then carefully unmount them.
4. Using a micro-USB cable, connect the base stations to one of your computer’s USB ports
one at time.
5. While pressing the Channel button at the back of the base station, plug in the base
station’s power adapter.
Once the base station is detected by the SteamVR app, the firmware update will start
automatically.
Do not unplug the micro-USB cable or power cable any time before the firmware update is
complete. Doing so could result in a firmware error.
6.
When the update is complete, click Done.
Updating base station firmware via Bluetooth
The hardware may be purchased separately from the Accessories tab on
www.vive.com/
product/.
1. From your computer, open the SteamVR app.
2. Click Devices Bluetooth Settings Enable Bluetooth .
3. Do one of the following:
§ Click Devices Update Device, and then select the base stations.
§ If you see the icon, mouse over it to check if the firmware is out of date. If so, click
Update Device.
4. Follow the onscreen instructions to complete the process.
Do not unplug the power cable before the firmware update is complete. Doing so may result in
a firmware error.
49 Base stations
To Next Page
Loading...
