HTC VIVE Tracker 3.0 - Page 13

VIVE Tracker (3.0)
HTC Corporation
Developer Guidelines
V1.0
12/16/2020
10 HTC Confidential and Proprietary
1. LED Indicator: Shows the status of VIVE Tracker (3.0).
2. Power Button: Used for powering on/off, BLE pairing, etc.
3. Sensor: Receives signals from the base stations. The VR system uses the received signals
for computing the current location of VIVE Tracker (3.0). Accessories should minimize
surface reflection (e.g. avoid white) since it may cause faulty signal and affect
performance. Anti-reflective painting is recommended.
4. Docking Mechanism: Standard camera tripod docking method is used which is comprised
of:
4.1 1/4” Screw nut to fasten the accessory.
4.2 Stabilizing pin recess for constraining the tracker from rotating.
4.3 Pogo pin port (spring contact-type) for optional electrical connection to the
accessory.
4.4 Friction pad to provide a surface with friction between the accessory and VIVE
Tracker (3.0)
5. USB Port: Used for electrical connection to the accessory through a USB Type-C cable
3. Sensors
1. LED Indicator
2. Power Button
5. USB Port
4.3 Pogo Pin
(6 pins)
4.1 Standard Camera Mount
(1/4” Screw Nut)
4.2 Stabilizing Pin Recess
4.4 Friction Pad