Except for essential parts, such as the 1/4’’ screw, electric connection pad (which connects
with the Pogo pin), and related circuits of the electric connection pad, metal parts of the
accessory should be separated from the antenna by at least 30mm to prevent OTA
performance reduction when the accessory is attached to VIVE Tracker (3.0).
Note
AC: D+ short to D-
PC: D+/D- communication
The field of view (FOV) of VIVE Tracker (3.0) is 240 degrees. Avoid obstructing the FOV of
VIVE Tracker (3.0) as this will block responses from the tracker sensors.
If the parts of the docking extend beyond the recommended placement cone, additional views
will be blocked.
Figure: Part of dock extend beyond recommended placement cone