HTL HTL-Advansys-15.2U

Questions and Answers

C
Clarence SmithAug 5, 2025
What to do if the fan is working but the UV lamp indicator is not lit on my HTL HTL-Advansys-15.2U Air Cleaner?
- E
  Eric WalkerAug 6, 2025
  If the fan in your HTL Air Cleaner is running but the UV lamp indicator isn't lit, there could be a few reasons. First, check that the UV lamp is correctly installed in its holder. If it isn't, reinstall the UV lamp. If the lamp is properly installed, the UV lamp itself may be inoperative, requiring a replacement. Alternatively, the ECG (electronic ballast) might be faulty, and you would need to replace it.
S
Sharon GrantAug 16, 2025
Why is the power indicator not lit on my HTL HTL-Advansys-15.2U?
- W
  whughesAug 16, 2025
  If the power indicator on your HTL Air Cleaner isn't lit, it's likely due to a faulty fuse. The solution is to replace the fuse.
A
Andre HarrisAug 27, 2025
How to fix a non-working fan on HTL HTL-Advansys-15.2U Air Cleaner if the UV indicators are blue?
- S
  samanthamillerAug 27, 2025
  If the UV indicators are blue, indicating the UV lamps are on, but the fan in your HTL Air Cleaner isn't working, it suggests that the fan has failed and needs to be replaced.

Summary

General Product Information

Product Description

Detailed description of the bactericidal air recirculator-irradiator.

Application and Usage

Specifies areas and conditions for air disinfection using the recirculator.

Design and Configuration Updates

Notes that design changes may not be immediately reflected in the passport.

Technical Specifications and Reliability

Main Technical Data

Lists key technical data including capacity, power, efficiency, and IP rating.

Reliability Indicators

Details UV lamp lifespan and warranty exclusions.

Operation Conditions

Refers to Table 2 for environmental operating parameters.

Product Set and Operation Principles

Delivery Contents

Lists all items included in the recirculator package.

Additional Components

Mentions possibility of extra items based on contract.

Principle of Operation

Explains how the recirculator disinfects air using UV radiation.

Pre-start Procedure

Step-by-step guide for setting up and preparing the recirculator before initial use.

Safety Instructions and Regulations

UV Lamp Safety

Covers UV lamp properties, ozone formation, and handling broken lamps.

Disposal of Germicidal Lamps

Procedures for packing and disposing of expired or faulty germicidal lamps.

General Safety Compliance

Emphasizes adherence to general safety rules and specific passport instructions.

Manufacturer Safety Guarantees

States manufacturer's guarantee of safety according to technical regulations.

User Limitations and Restrictions

Defines restrictions for use by persons with disabilities or lack of experience.

Prohibited Actions

Lists forbidden practices like ignoring safety, unauthorized modifications, or misuse.

Electrical and Installation Safety

Highlights electrical safety and requirements for installation.

Safe Loading and Unloading

Specifies safe handling procedures during loading and unloading.

Operating Procedures and Maintenance

Closed-Type Operation Mode

Instructions for using the recirculator in closed-type mode.

Open-Type Irradiation Mode

Instructions for using the recirculator in open-type irradiation mode.

UV Exposure Safety Warning

Critical warning about avoiding direct eye exposure to UV emitters.

Authorized Maintenance Only

Specifies that maintenance must be performed by the manufacturer or certified facility.

Prohibition of DIY Repairs

Strictly prohibits any unauthorized troubleshooting, repair, or adjustment.

Troubleshooting and Shipping

Troubleshooting Common Issues

Provides common problems, possible causes, and corrective actions.

Shipping and Transportation Guidelines

Covers packaging, vibration resistance, and transport conditions.

Storage Conditions

Details permissible ambient temperatures, humidity, and storage practices.

Manufacturers Warranty and Complaints

Warranty Terms and Conditions

Outlines the warranty period, coverage, and conditions.

Warranty Exclusions

Lists circumstances under which the manufacturer's warranty is invalidated.

Customer Complaint Procedure

Details the process for submitting quality complaints and required documentation.

Disposal Procedure

Environmental and Health Compliance

Ensures no harm to environment or health during product lifecycle.

End-of-Life Disposal Process

Describes decommissioning, decontamination, and forwarding for disposal.

Recyclable Materials and Compliance

Recommends utilization as consumer waste and adherence to waste regulations.

Disposal by Authorized Entities

Allows disposal through sole traders or authorized organizations.

Service Records and Repair Information

Service Records Log

Section for documenting maintenance and service performed on the unit.

Repair Records Log

Section for recording details of all repair works carried out.

Special Notices for Passport Entries

Instructions on proper writing, corrections, and certification within the passport.