Please connect the Wi-Fi module with heat pump unit. At the same time, please keep the
module and mobile devices can receive the same networks.
Power on the heat pump unit, and keep pressing the timer button and the increase
button at the same time for 5 seconds. The SET icon will be flashed. When the Wi-Fi
indicator keeps fast-flashing, please click the "Confirm indicator rapidly blink".
Notes: when the icon of set flashes quickly, it mean the controller is in the Wi-Fi mode. When it
flashes slowly, it means the controller is connecting with the App. During the connection, if the
icon of set is extinguished, it means the App connection with the unit is finished.
If the mobile is not connected with Wi-Fi from the router, the interface will be automatically
skipped to the following interface.
To Next Page
Loading...
