HTW LH5 - Airflow Direction Control

Do not turn the horizontal adjustment louvers manually, otherwise malfunction may occur. If that happens,
turn off the unit first and cut off the power supply, then restore power supply again.
It is better not to let the adjustment louver tilt downward for a long time at COOLING or DRY mode to prevent
condensed water from dripping.
horizontal
Operation instructions
13
Airflow direction control
MODE
CLOCK
TIMER ON
TIMER OFF
DIMMER
SMART
MUTE
TEP SWITCH
SLEEP
I FEEL
SOFT
4
4
SWING
SWING
4
Airflow direction control
Horizontal vertical and airflow is automatically adjusted to a certain
angle in accordance with the operation mode after turning on the unit.
The direction of airflow can be
also adjusted to your own
requirement by pressing the
" " and the " "
button of the remote controller.
Operation mode Direction of airflow
COOLING, DRY
*HEATING,
FAN ONLY
horizontal
downward
SWING
SWING
Vertical airflow control (with the remote controller)
Using remote controller to set various angles of flow or specific angle
as you like.
Swinging airflow
Pressing " " button once, the adjustment
louver will swing up and down automatically.
horizontal
Desired direction airflow
Pressing the " " button again when the louvers swing
to a suitable angle as desired.
Horizontal airflow control (with the remote controller)
Using remote controller to set various angles of flow or specific angle
as you like.
Swinging airflow
Pressing " " button once, the vertical adjustment
louver will swing left and right automatically.
Desired direction airflow
Pressing the " " button again when the louvers swing
to a suitable angle as desired.
SWING
SWING
SWING
SWING
Note: invalid for cassette type.Vertical airflow control is