Figure 4-31 iBMC login page
Step 3 On the login page, enter the user name and password.
The default user name is Administrator, and the default password is Admin@9000.
NOTE
If the account is locked due to five consecutive failed attempts, try again in 5 minutes.
Step 4 Select This iBMC from the Domain drop-down list.
Step 5 Click Log In.
If the login is successful, the Overview page is displayed, showing the user name in the upper
right corner.
----End
4.6.5 Checking the Server
There are two methods available for checking the 2288H V5. Use the iBMC CLI or the iBMC
WebUI based on the actual situation.
For details about CLI commands, see the Huawei Rack Server iBMC User Guide.
2288H V5 Server
User Guide
4 Setup
Issue 04 (2018-09-04) Copyright © Huawei Technologies Co., Ltd. 99
To Next Page
Loading...
