Figure 4-41 Security
Step 2 Select Manage Supervisor Password and press Enter, and set the administrator password.
Before setting the password, you must enter the current administrator password. If incorrect
passwords are entered for three consecutive times, the system will be locked. You can restart
the server to unlock the system.
NOTE
l The default password is Admin@9000.
l The administrator password must meet the following requirements:
– Contains 8 to 16 characters.
– Contains special characters (including spaces) and at least two types of the following
characters: uppercase letters, lowercase letters, and digits.
– Cannot be the same as any of the previous five passwords.
l After the password is set, the Delete Supervisor Password parameter is displayed for ease of
clearing the password.
l If Simple Password is set to Enabled, password complexity check will not be performed. However,
the password must still contain 8 to 16 characters.
Step 3 Press F10.
The Save Changes&Exit dialog box is displayed.
Step 4 Select Yes and press Enter.
----End
2288H V5 Server
User Guide
4 Setup
Issue 04 (2018-09-04) Copyright © Huawei Technologies Co., Ltd. 110
To Next Page
Loading...
