Step 8 Remove the heat sink filler.
Step 9 Take a spare CPU out of its ESD bag.
Step 10 Use a clean, alcohol-moistened cloth to remove excess oil or foreign matter from the surface
of the CPU, heat sink, and CPU carrier.
Step 11 Align the notch in the center of one CPU edge with the protrusion on the CPU carrier and
secure it. See Figure 5-41.
Ensure that the CPU corner marked with a triangle is in the corner of the carrier with a
triangular hole.
Figure 5-41 Installing one edge of a CPU
Step 12 Bend the other edge of the CPU carrier in the direction of the arrow. See Figure 5-42.
2288H V5 Server
User Guide
5 Optional Part Installation
Issue 04 (2018-09-04) Copyright © Huawei Technologies Co., Ltd. 149
To Next Page
Loading...
