Ubuntu
Ubuntu 14.04 LTS and Ubuntu 16.04 LTS are supported.
Step 1 Download the IRC package for windows kvm_client_ubuntu.zip to the local PC and
decompress it.
The IRC package is available at Independent Remote Console.
Step 2 Connect the local PC to the iBMC management network port of the server, and configure an
IP address for the client to enable communication between the client and the iBMC.
The IP address configured for the PC and the iBMC management network port IP address
must be in the same network segment.
Step 3 Open the console and specify the folder in which the IRC is stored as the working folder.
Step 4 Run the chmod 777 KVM.sh command to set the permission for the IRC.
Step 5 Run ./KVM.sh to start the IRC.
A dialog box similar to the one shown in Figure 14-11 is displayed.
Figure 14-11 Login interface
Step 6 Enter the network address, user name, and password.
The network address can be in any of the following formats:
l iBMC [IPv6 address]:Port number or iBMC IPv4address:Port number
Port number indicates the iBMC HTTPS port number.
For example, [2001::64]:444 or 192.168.100.1:444
The default port number 443 can be omitted.
l iBMC domain name address:Port number
Step 7 Select a login mode, and click Connect.
l Shared Mode: allows two users to access and manage a server at a time. The two users
can see each other's operations.
2288H V5 Server
User Guide
14 Common Operations
Issue 04 (2018-09-04) Copyright © Huawei Technologies Co., Ltd. 267
To Next Page
Loading...
