Figure 3-22 Removing a PCIe card from a riser card
Step 8 Open the PCIe card latch. See (2) in Figure 3-22.
Step 9 Pull out the PCIe cards. See (3) in Figure 3-22.
Step 10 Place the removed riser card tray in an ESD bag.
Step 11 If a new riser card tray is not installed immediately, install a filler panel. See Figure 3-23 or
Figure 3-24.
2288H V5 Server
User Guide
3 Basic Operations
Issue 04 (2018-09-04) Copyright © Huawei Technologies Co., Ltd. 62
To Next Page
Loading...
