8
3. Measure the signal strengths at the recommended installation locations in the app, and find a
location with optimal signal strength.
The CPE can be installed on a pole or wall, and must be within the protection range of the lightning rod,
measured at a 45-degree angle from the top of the rod.
4.2 Test the signal strength with an iPhone/computer.
1. Connect a phone or laptop to the CPE by connecting to the Wi-Fi.
Optimize location
Excellent signal
Now
Score
92
Reuslts
Excellent
Poor
45° 45°
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
LAN
WAN&
POWER
Reset
To Next Page
Loading...
