2
Optional Components
The following non-standard accessories should be used for outdoor installation if they are contained in
the packing box, in order to ensure the waterproof performance.
Flat-hole waterproof PG connector
10-meter CAT.5e flat Ethernet cable
The following are required to install the device:
Pen
Level
Hammer
Electric drill
M6 Allen wrench
Screwdriver
Torque wrench
CAT.5e Ethernet cable*
* If there is not a 10-meter CAT.5e flat Ethernet cable in the packing box, please purchase a round
Ethernet cable with a length of no more than 30 m, and use it with the standard round-hole waterproof
PG connector for outdoor installation to ensure an optimal waterproof performance.
To Next Page
Loading...
