~100-240 V 50/60 Hz 3 A
12 V 2.1 A
;
OUTPUT
0
IN
OUT
6*
----End
5.7 Powering On and Off the Router
Context
Check the following items before powering on the router:
l The power cables are correctly connected.
l The DC input voltage is in the range of 9.6 V to 60 V.
Procedure
l Power on the router.
Turn on the power switch of the external power supply system to start the router.
After the router starts, check indicators on the front panel to check whether the router
runs normally. Figure 5-1 describes the indicator states when the router is running
normally.
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
5 Installing an AR550 Series Industrial Switching Router
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
122
To Next Page
Loading...
