Huawei AR Series - 3.8 Powering On and Off the Router

4Pin
A
C Power Strip
AC Power Cable
c
a
b
----End
Follow-up Procedure
Perform the following operations after connecting the power cables:
l Verify that power cables are securely connected to power sockets.
l If multiple routers are installed, attach labels to both ends of each power cable and write
numbers on the labels to identify them.
3.8 Powering On and Off the Router
Context
Check the following items before powering on the router:
l The power cables are correctly connected.
l The DC input voltage is in the range of 8 V to 36 V.
Procedure
l Power on the router.
Turn on the power switch of the external power supply system to start the router.
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
3 Installing an AR500 Series Industrial Access Router
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
35