Huawei AR1200-S - Configuring a Domain

By default, the traffic unit is byte on the AR1200-S.
Step 11 (Optional) Run:
radius-server { retransmit retry-times | timeout time-value }
*
The number of times RADIUS request packets are retransmitted and timeout interval are set.
By default, the number of transmission times is 3 and the timeout interval is 5s.
Step 12 (Optional) Run:
radius-server nas-port-format { new | old }
The format of the Network Access Server (NAS) port attribute is set.
By default, the new format of the NAS port attribute is used.
Step 13 (Optional) Run:
radius-server nas-port-id-format { new | old }
The format of the NAS port ID attribute is set.
By default, the new format of the NAS port ID attribute is used.
Step 14 (Optional) Run:
radius-attribute nas-ip
The RADIUS NAS-IP-Address attribute is set.
Step 15 (Optional) Run:
return
Return to the user view.
Step 16 (Optional) Run:
test-aaa user-name user-password radius-template template-name [ chap | pap ]
You can test whether a user can be authenticated using RADIUS authentication.
----End
1.4.4 Configuring a Domain
The created authentication scheme, accounting scheme, and RADIUS server template take effect
only after being applied to a domain.
Context
Before configuring a domain, ensure that the authentication scheme, accounting scheme, and
RADIUS server template have been created.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
aaa
Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security 1 AAA Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
16