EasyManua.ls Logo

Huawei AR1200 Series - Basic Configuration

Huawei AR1200 Series
392 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Assign an IP address to each interface as shown in Figure 1-5. The specific configuration is not
mentioned here.
Step 2 Configure IGP for the VPN backbone network.
# Configure Router A.
[RouterA] ospf 1
[RouterA-ospf-1] area 0
[RouterA-ospf-1-area-0.0.0.0] network 20.1.1.0 0.0.0.255
[RouterA-ospf-1-area-0.0.0.0] quit
[RouterA-ospf-1] quit
# Configure Router B.
[RouterB] ospf 1
[RouterB-ospf-1] area 0
[RouterB-ospf-1-area-0.0.0.0] network 20.1.1.0 0.0.0.255
[RouterB-ospf-1-area-0.0.0.0] network 30.1.1.0 0.0.0.255
[RouterB-ospf-1-area-0.0.0.0] quit
[RouterB-ospf-1] quit
# Configure Router C.
[RouterC] ospf 1
[RouterC-ospf-1] area 0
[RouterC-ospf-1-area-0.0.0.0] network 30.1.1.0 0.0.0.255
[RouterC-ospf-1-area-0.0.0.0] quit
[RouterC-ospf-1] quit
After the configuration, run the display ip routing-table command on Router A and Router C.
You can find that they both learn the OSPF route to the network segment of the remote interface.
Take Router A as an example.
[RouterA] display ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 8 Routes : 8
Destination/Mask Proto Pre Cost Flags NextHop Interface
10.1.1.0/24 Direct 0 0 D 10.1.1.2
GigabitEthernet2/0/0
10.1.1.2/32 Direct 0 0 D 127.0.0.1 InLoopBack0
20.1.1.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
30.1.1.0/24 OSPF 10 2 D 20.1.1.2
GigabitEthernet1/0/0
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
Step 3 Configure the tunnel interface.
# Configure Router A.
[RouterA] interface tunnel 0/0/1
[RouterA-Tunnel0/0/1] ip address 40.1.1.1 24
[RouterA-Tunnel0/0/1] source 20.1.1.1
[RouterA-Tunnel0/0/1] destination 30.1.1.2
[RouterA-Tunnel0/0/1] quit
# Configure Router C.
[RouterC] interface tunnel 0/0/1
[RouterC-Tunnel0/0/1] ip address 40.1.1.2 24
[RouterC-Tunnel0/0/1] source 30.1.1.2
[RouterC-Tunnel0/0/1] destination 20.1.1.1
[RouterC-Tunnel0/0/1] quit
Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN 1 GRE Configuration
Issue 01 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
19

Table of Contents

Other manuals for Huawei AR1200 Series

Related product manuals