– The value configured by screen-length screen-length temporary command must
be larger than 0.
– The total number of lines in the file must be greater than the value configured by
screen-length command.
– Running the more file-name offset command to view the file named file-name. Contents
of a text file are displayed screen by screen beginning with the line specified by offset.
Hold and press the spacebar on the current terminal to display all contents of the current
file.
Two preconditions must be met to display the contents of a text file screen by screen:
– The value configured by screen-length screen-length command must be greater than
0.
– The result difference between the number of file characters subtracted and the value
of offset must be greater than the value configured by the screen-length command.
– Running the more file-name all command to view the file named file-name. Contents
of a text file are completely displayed without pausing after each screen of information.
l Run:
copy source-filename destination-filename
The file is copied.
l Run:
move source-filename destination-filename
The file is moved.
l Run:
rename source-filename destination-filename
The file is renamed.
l Run:
zip source-filename destination-filename
The file is compressed.
l Run:
delete [ /unreserved ] [ /force ] { filename | device-name } [ all ]
The file is deleted.
CAUTION
If you use the parameter [ /unreserved ] in the delete command, the file cannot be restored
after being deleted.
l Run:
undelete filename
The deleted file is recovered.
NOTE
If the current directory is not the parent directory, you must use the absolute path to the file to perform
operations.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration 6 Managing the File System
Issue 04 (2012-05-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
108
To Next Page
Loading...
