Context
If you cannot perform routine maintenance, you must run the various display commands to
collect information needed to locate faults. The display diagnostic-information command
gathers information about all system modules currently running.
Procedure
l Run:
display diagnostic-information
The system diagnostic information is displayed.
The display diagnostic-information command collects all information collected by
running the following commands, including display clock, display version, and so on.
----End
Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration 3 Basic Configuration
Issue 04 (2012-05-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
41
To Next Page
Loading...
