Huawei AR150 series - 3.2 Logging In to the Router Through the Console Port

3.2 Logging In to the Router Through the Console Port
This section describes how to log in to the router through the console port.
Procedure
Step 1 Connect the router to a PC using a Console Cable. Connect the RJ45 connector of the cable to
the console port of the router, and connect the DB9 connector to the serial port of the PC.
Step 2 Run the terminal emulation program on the PC. For example, to open the HyperTerminal of
Windows XP on the PC, choose Start > Programs > Accessories > Communications >
HyperTerminal. Enter the name of the new connection in the Name text box and click OK, as
shown in Figure 3-2.
Figure 3-2 Creating a connection
Step 3 Select the console port used and click OK, as shown in Figure 3-3.
Huawei AR150&200 Series Enterprise Routers
Quick Start Guide 3 Logging In to the Router
Issue 03 (2012-06-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
27