Click Next to access the Finish Configuration Wizard page.
Step 4 Confirm the configurations.
View the configurations on the Finish Configuration Wizard page. To confirm the
configurations, click Finish. To modify the configurations, click Previous. If you quit the wizard
without clicking Finish, the configurations will not take effect.
----End
4.2 Going Online Using a Dynamic IP Address
This section describes how to go online using a dynamic IP address.
Networking Requirements
As shown in Figure 4-2, RouterA functions as the enterprise egress gateway. The uplink
interface obtains a dynamic IP address to connect to the Internet. Configure RouterA using the
web network management system so that LAN users can access the Internet.
Huawei AR150&200 Series Enterprise Routers
Quick Start Guide 4 Connecting to the Internet
Issue 03 (2012-06-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
33
To Next Page
Loading...
