7.5.1 Clearing Alarm Messages
You can clear alarm messages in the alarm view as required.
Context
CAUTION
After alarm messages are cleared, there is no way for the NMS to obtain any information about
these cleared messages. Therefore, before deleting alarm messages, be sure that the NMS no
longer needs these alarm messages.
In routine maintenance, you can run the following commands in the alarm view to clear alarm
messages.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
alarm
The alarm view is displayed.
Step 3 Run:
clear alarm active { all | sequence-number sequence-number }
Active alarm messages are cleared.
----End
7.5.2 Clearing Event Messages
You can clear event messages in the event view as required.
Context
CAUTION
After event messages are cleared, there is no way for the NMS to obtain any information about
these cleared messages. Therefore, before deleting event messages, be sure that the NMS no
longer needs these event messages.
In routine maintenance, you can run the following commands in the event view to clear event
messages.
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Device Management 7 Fault Management
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
120
To Next Page
Loading...
