NOTE
The software package arsoft.cc has been loaded to the AR2200. For details on how to upload the software
package, see 6.3 Performing File Operations by Means of FTP.
Step 5 Verify the configuration.
After the configuration is complete, run the following command to check the configuration file
and system software to be loaded during the next startup of the router.
<Huawei> display startup
MainBoard:
Startup system software: usb0:/ar0312.cc
Next startup system software: usb0:/arsoft.cc
Backup system software for next startup: null
Startup saved-configuration file: flash:/iascfg.zip
Next startup saved-configuration file: usb0:/arcfg.cfg
Startup license file: null
Next startup license file: null
Startup patch package: null
Next startup patch package: null
Startup voice-files: null
Next startup voice-files: null
----End
Configuration Files
None.
Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration 7 Configuring System Startup
Issue 02 (2011-10-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
121
To Next Page
Loading...
