Huawei AR2200 Series - Uploading Files by Using TFTP; Checking the Configuration

Procedure
l Run:
tftp [ -a source-ip-address | -i interface-type interface-number ] tftp-
server [ public-net | vpn-instance vpn-instance-name ] get source-filename
[ destination-filename ]
The router is configured to download files through TFTP.
----End
8.5.5 Uploading Files by Using TFTP
You can upload files from the TFTP client to the TFTP server.
Do as follows on the router that serves as the TFTP client:
Procedure
l Run:
tftp [ -a source-ip-address | -i interface-type interface-number ] tftp-
server [ public-net | vpn-instance vpn-instance-name ] put source-filename
[ destination-filename ]
The router is configured to upload files through TFTP.
----End
8.5.6 Checking the Configuration
When a device is configured to be a TFTP client, you can check the source address of the client
and the configured ACl rule.
Prerequisite
Configurations of using the device as a TFTP client are complete.
Procedure
l Run the display tftp-client command to check the device address that is set to the source
address of the TFTP client.
l Run the display acl { name acl-name | acl-number | all } command to check the ACL rule
that is configured on the TFTP client.
----End
Example
Run the display tftp-client command to view the source address of the TFTP client.
<Huawei> display tftp-client
Info: The source address of TFTP client is 1.1.1.1.
Run the display acl{ name acl-name | acl-number | all } to view the ACL rule that is configured
on the TFTP client.
<Huawei> display acl 2001
Basic acl 2001, 2 rules,
Acl's step is 5
rule 5 permit
Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration 8 Accessing Another Device
Issue 02 (2011-10-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
140