Huawei AR2200 Series - Checking the Configuration

9.6.4 Checking the Configuration
After the router has been configured to restart as scheduled, you can view parameters set for the
scheduled restart.
Prerequisite
The configurations of restarting the router as scheduled are complete.
Procedure
l Run the display schedule reboot command to check the parameters set for the scheduled
restart of the router.
----End
Example
# View the configuration of the router restart, with the restart time at 00:00.
<Huawei> display schedule reboot
Info:System will reboot at 00:00:00 2009/07/01 (in 12 hours and 33 minutes).
# View the configuration of the router restart, with the wait time of 12 hours before the restart.
<Huawei> display schedule reboot
Info:System will reboot at 23:27:14 2009/06/30 (in 11 hours and 59 minutes).
9.7 Configuration Examples
This section provides configuration examples for upgrade and maintenance, including
networking requirements, precautions, and configuration roadmap. The configuration flowchart
will help you understand the configuration procedures.
9.7.1 Example for Upgrading System Software
This section provides detailed procedures for upgrading system software. This will help you to
complete the upgrade task quickly and accurately.
Networking Requirements
The current system software needs to be upgraded if it cannot provide additional features or
larger specifications required by customers.
As shown in Figure 9-2, the system software of the cannot meet customer's requirements and
needs to be upgraded. Huawei has provided related upgrade files for the customer to perform
software upgrade on the.
Figure 9-2 Networking diagram for upgrading system software
MPLS Core
PE
FTP Server
PC
10.1.1.2/24
GE2/0/0
10.1.1.1/24
Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration 9 Upgrade and Maintenance
Issue 02 (2011-10-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
195