Huawei AR2200 Series - 4 Configuring User Interface

4 Configuring User Interface
About This Chapter
When a user logs in to the router by using the console port, the TTY port, Telnet, or SSH, the
system manages the session between the user and the router on the corresponding user interface.
4.1 User Interface Overview
The system supports console, and VTY user interfaces.
4.2 Configuring the Console User Interface
When a user logs in to the router by using a console port for local maintenance, you can configure
attributes for the corresponding console user interface are needed.
4.3 Configuring VTY User Interface
If you need to log in to the router for local or remote maintenance by using Telnet or SSH, you
can configure the corresponding VTY user interface as needed.
4.4 Configuring a TTY User Interface
The True Type Terminal (TTY) user interface view is a command line view and is used to
configure and manage physical interfaces working in asynchronous and interactive mode.
4.5 Configuration Examples
This section provides examples for configuring console, TTY user interfaces, and VTY user
interfaces. These configuration examples explain networking requirements, configuration
roadmap, and configuration notes.
Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration 4 Configuring User Interface
Issue 02 (2011-10-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
30