Figure 6-54 Holding the male and female unshielded connectors
Step 2 Feed the male connector into the female connector, as shown in Figure 6-55.
Figure 6-55 Feeding the male connector into the female unshielded connector
Step 3 A crisp click indicates that the connector is locked by the locking key. Pull the connector
slightly and ensure that it is securely connected. Figure 6-56 shows an installed Ethernet
connector.
Figure 6-56 Installed unshielded Ethernet connector
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
6 Appendix
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
166
To Next Page
Loading...
