# Configure Router2.
[Router2] interface gigabitethernet 7/0/1
[Router2-GigabitEthernet7/0/1] stp disable
[Router2-GigabitEthernet7/0/1] sep segment 1
[Router2-GigabitEthernet7/0/1] quit
[Router2] interface gigabitethernet 7/0/3
[Router2-GigabitEthernet7/0/3] stp disable
[Router2-GigabitEthernet7/0/3] sep segment 1
[Router2-GigabitEthernet7/0/3] quit
[Router2] interface gigabitethernet 7/0/2
[Router2-GigabitEthernet7/0/2] stp disable
[Router2-GigabitEthernet7/0/2] sep segment 2 edge primary
[Router2-GigabitEthernet7/0/2] quit
# Configure Router3.
[Router3] interface gigabitethernet 7/0/3
[Router3-GigabitEthernet7/0/3] stp disable
[Router3-GigabitEthernet7/0/3] sep segment 1
[Router3-GigabitEthernet7/0/3] quit
[Router3] interface gigabitethernet 7/0/4
[Router3-GigabitEthernet7/0/4] stp disable
[Router3-GigabitEthernet7/0/4] sep segment 1
[Router3-GigabitEthernet7/0/4] quit
[Router3] interface gigabitethernet 7/0/2
[Router3-GigabitEthernet7/0/2] stp disable
[Router3-GigabitEthernet7/0/2] sep segment 2 edge secondary
[Router3-GigabitEthernet7/0/2] quit
[Router3] interface GigabitEthernet 7/0/1
[Router3-GigabitEthernet7/0/1] stp disable
[Router3-GigabitEthernet7/0/1] sep segment 3 edge secondary
[Router3-GigabitEthernet7/0/1] quit
# Configure Router4.
[Router4] interface gigabitethernet 7/0/2
[Router4-GigabitEthernet7/0/2] stp disable
[Router4-GigabitEthernet7/0/2] sep segment 1
[Router4-GigabitEthernet7/0/2] quit
[Router4] interface GigabitEthernet 7/0/3
[Router4-GigabitEthernet7/0/3] stp disable
[Router4-GigabitEthernet7/0/3] sep segment 1
[Router4-GigabitEthernet7/0/3] quit
[Router4] interface gigabitethernet 7/0/1
[Router4-GigabitEthernet7/0/1] stp disable
[Router4-GigabitEthernet7/0/1] sep segment 3 edge primary
[Router4-GigabitEthernet7/0/1] quit
# Configure Router5.
[Router5] interface gigabitethernet 7/0/1
[Router5-GigabitEthernet7/0/1] stp disable
[Router5-GigabitEthernet7/0/1] sep segment 1
[Router5-GigabitEthernet7/0/1] quit
[Router5] interface gigabitethernet 7/0/3
[Router5-GigabitEthernet7/0/3] stp disable
[Router5-GigabitEthernet7/0/3] sep segment 1
[Router5-GigabitEthernet7/0/3] quit
# Configure Router6 to Router11.
The configurations of Router6 to Router11 are similar to the configurations of Router1 to
Router5 except for the interface roles.
For details about the configuration, see the configuration files.
3. Specify an interface to block.
# On Router1 where the primary edge interface of SEP segment 1 is located, specify the
interface with the highest priority to block.
Huawei AR530&AR550 Series Industrial Switch Routers
Configuration Guide - Ethernet Switching
8 SEP Configuration
Issue 01 (2014-11-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
323
To Next Page
Loading...
