Huawei AR530 Series - Link Aggregation Configuration

2 Link Aggregation Configuration
About This Chapter
Link aggregation is a technology that bundles multiple Ethernet links into a logical link to
increase bandwidth, improve reliability, and load balance traffic.
2.1 Introduction to Link Aggregation
This section describes definition and purpose of link aggregation.
2.2 Principles
This section describes principles of link aggregation.
2.3 Application Environment
This section describes application environments of Ethernet link aggregation.
2.4 Configuration Task Summary
The device supports the manual load balancing mode and Link Aggregation Control Protocol
(LACP) mode.
2.5 Default Settings
This section describes default parameter settings of link aggregation.
2.6 Configuring Ethernet Link Aggregation
This section describes how to configure Ethernet link aggregation.
2.7 Maintaining Link Aggregation
This section describes how to maintain link aggregation, including monitoring the link
aggregation running status and clearing LACPDU statistics.
2.8 Configuration Examples
This section provides several configuration examples of link aggregation.
2.9 Common Configuration Errors
This section describes common configuration errors.
2.10 References
This section describes references of link aggregation.
Huawei AR530&AR550 Series Industrial Switch Routers
Configuration Guide - Ethernet Switching
2 Link Aggregation Configuration
Issue 01 (2014-11-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
30