Figure 3-30 AR503EDGW-Lo appearance
1
Power input jack
NOTE
Use a DC power cable to connect the router
to an external power source.
2 LTE1 antenna interface
3 LTE0 antenna interface 4 GPS/BDS antenna interface
5 Three Wi-Fi antenna interfaces 6 LAN interfaces: four GE electrical
interfaces
NOTE
l LAN interfaces GE0 to GE3 can be
configured as WAN interfaces.
l GE0 is a management interface and is
used to upgrade the router.
7 USB interface (host) 8 RST button
NOTE
This button is used to reset the router.
l To restore the factory settings, hold down
the button for at least 5 seconds.
l To reset the system, press the button.
Resetting the router will interrupt services.
Exercise caution when deciding to press this
button.
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
3 Chassis
Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd. 207
To Next Page
Loading...
