Huawei AR550-8FE-D-H - Page 63

Attribute Description
Cable type
l 6.3.2 LTE Whip Antenna
l 6.3.4 Outdoor LTE Antenna
l 6.3.3 LTE Indoor Remote Antenna
DI/DO interface
The DI/DO interfaces are used to detect voltage level signals or deliver instructions. Table
3-53 lists DI/DO interface attributes.
Table 3-53 DI/DO interface attributes
Attribute
Description
Connector type RJ45
Signal type LVTTL voltage level, digital input/output
Cable type 6.2.7 RJ-45 Connector (DI/DO)
RS485/RS422 interface
The RS485/RS422 interface can be connected to a meter or monitoring terminal. Table 3-54
lists RS485/RS422 interface attributes.
Table 3-54 RS485/RS422 interface attributes
Attribute
Description
Connector type 5-pin Phoenix terminal block
Standards compliance RS485/RS422
Working mode
l RS485: half-duplex
l RS422: full-duplex
Communication distance 1 km (> 19 kbit/s)
Baud rate 1200/2400/4800/9600/115200
Cable type 6.2.8 5-Pin Phoenix Connector (RS485/
RS422)
RF antenna interface
An RF antenna interface connects to an RF antenna to receive and transmit wireless data.
Table 3-55 lists the attributes of an RF antenna interface.
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
3 Chassis
Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd. 134