Table 6-46 Technical specifications of an LTE strip-shaped remote antenna
Item Specification
Connector type SMA-J (screw threads and pin inside)
Cable length 3 m
Frequency bands supported
l 698 MHz to 960 MHz
l 1710 MHz to 2690 MHz
Maximum gain 0.5 dBi
Standing wave ratio 2.5
Polarization Vertical
Direction Omnidirectional
Connection
An LTE strip-shaped remote antenna is connected as follows:
l The SMA male connector is connected to the LTE MAIN interface on a router.
l The other end (cover) is attached to a plastic horizontal plane.
Ordering Information
Table 6-47 provides the LTE strip-shaped remote antenna ordering information.
Table 6-47 LTE strip-shaped remote antenna ordering information
Part Number
Description Remarks
27012295 Omni-directional Antenna,
698MHz-960MHz/1710MHz-2690MHz,
1.0dBi(698MHz-960MHz)&2dBi(1710MH
z-2690MHz),5W,SMA-J
Optional
6.3.6 433 MHz RF Remote Antenna
Description
A 433 MHz RF remote antenna is delivered with a router that provides the radio frequency
(RF) function. It is used on an RF antenna interface to provide RF access.
Appearance and Structure
Figure 6-24 shows the appearance of a 433 MHz RF remote antenna.
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
6 Cables
Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd. 675
To Next Page
Loading...
