Appearance and Structure
Figure 6-37 shows the structure of a GPS/BDS remote antenna.
Figure 6-37 Structure of a GPS/BDS remote antenna
Technical Specifications
Table 6-68 lists technical specifications of a GPS/BDS remote antenna.
Table 6-68 Technical specifications of a GPS/BDS remote antenna
Item
Specification
Connector type SMA-J (screw threads and pin inside)
Cable length 3 m
Frequency bands supported
l GPS: 1575.42 MHz
l BDS: 1561.098 MHz
Maximum gain 3 dBi
Standing wave ratio 2.0
Polarization Right hand circular polarization
Direction Omnidirectional
Connection
A GPS/BDS remote antenna is connected as follows:
l The SMA male connector is connected to the GPS/BDS interface on a router.
l The other end (cover) is attached to a plastic horizontal plane.
Ordering Information
Table 6-69 provides the GPS/BDS remote antenna ordering information.
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
6 Cables
Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd. 692
To Next Page
Loading...
