Connection
A DTMB remote antenna is connected as follows:
l The SMA connector of the feeder is connected to the DTMB interface on a router.
l The antenna is attached to a plastic horizontal plane.
Ordering Information
None
6.3.22 sub-GHz Antenna
Description
A sub-GHz antenna has a feeder. Connect the feeder to the sub-GHz interface of an industrial
switching router and place the antenna on a horizontal plane. The sub-GHz antenna is
recommended when an industrial switching router is installed in a cabinet or rack.
Appearance and Structure
Figure 6-46 shows the appearance of a sub-GHz antenna.
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
6 Cables
Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd. 700
To Next Page
Loading...
