Numbe
r
Indicator Color Description
Blinking green: The system is being upgraded
or configured using a USB flash drive.
Steady red: The system fails to be upgraded or
configured using a USB flash drive.
Off: No USB flash drive is connected, the USB
interface has failed, or the indicator has failed.
4 WWAN0
(indicator for
the 3G/LTE0
antenna
interface)
Green Steady on: An LTE/3G/2G connection has been
established and is active.
Blinking: Data is being transmitted or received
over the LTE/3G/2G connection.
Off: The LTE/3G/2G connection has not been
established or is inactive.
5 RSSI0
(indicator for
the 3G/LTE0
antenna
interface)
Green Steady on: The LTE/3G/2G signal strength is
high.
Fast blinking: The LTE/3G/2G signal strength is
medium.
Slow blinking: The LTE/3G/2G signal strength
is low.
Off: No LTE/3G/2G signal is available.
6 WWAN1
(indicator for
the 3G/LTE1
antenna
interface)
Green Steady on: An LTE/3G/2G connection has been
established and is active.
Blinking: Data is being transmitted or received
over the LTE/3G/2G connection.
Off: The LTE/3G/2G connection has not been
established or is inactive.
7 RSSI1
(indicator for
the 3G/LTE1
antenna
interface)
Green Steady on: The LTE/3G/2G signal strength is
high.
Fast blinking: The LTE/3G/2G signal strength is
medium.
Slow blinking: The LTE/3G/2G signal strength
is low.
Off: No LTE/3G/2G signal is available.
8 GPS Green Steady on: The GPS function is enabled.
Off: The GPS function is disabled.
9 WLAN1
(working at
Green Blinking: Data is being transmitted on the
WLAN link.
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
3 Chassis
Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd. 253
To Next Page
Loading...
