Shoot in Portrait, Night, and Wide
Aperture Modes
Use Portrait Mode to Shoot Portraits
Portrait mode lets you apply beauty, and blur eects to your photos to shoot stunning
portraits.
1 Open Camera and select Portrait mode.
2 Frame your subject in the viewnder.
To take a sele, touch .
3 You can also:
• Enable beauty eect: Touch and drag the slider to adjust beauty settings. A larger
value will produce a more distinct beauty eect. To disable the beauty eect, drag
each setting to its lowest value.
• Set blur
eects: Touch and select blur eects to your liking.
4 Touch
to take a photo.
Take Night Shots
Night mode solves the issues caused by low light and night shooting to give your photos
sharper details and brighter colours.
You can also use Night mode when shooting backlit subjects and scenes with
owing water,
such as waterfalls, to create a better contrast or a smooth, silky water eect.
1 Open Camera and select Night mode.
2 If you are using the rear camera, touch on the viewnder to adjust the ISO sensitivity
or
to adjust the shutter speed.
3 Keep your device steady and touch .
4 Your device will adjust the exposure time based on the ambient brightness. Keep your
device steady.
Do not stop shooting before the countdown nishes or your photos may come out blurry.
Shoot Wide Aperture Photos
Wide aperture mode allows you to shoot photos where the background is blurred while your
subject remains in sharp focus.
1 Open Camera and select Aperture mode.
38