9
How can I connect to the router using WPS (Wi-Fi
Protected Setup)?
To connect a WPS-enabled device to your router using the WPS button:
1. Press and hold the WPS button on the router for at least 2 seconds
and then release, the
indicator starts to blink.
2. Enable WPS on your device within 2 minutes to connect to the
router's Wi-Fi network.
Why can't I access the router's web-based management
page?
1. Ensure that your computer is connected to the router through an
Ethernet cable or Wi-Fi.
2. Ensure that your computer is set to obtain an IP address and DNS
server address automatically.
3. Restart your browser, or try using another browser.
4. If the problem persists, restore the router to its factory settings.
Why is the content displayed on the web-based
management page not up to date?
Depending on your browser's cache, the content for your device on the
web-based management page may not be up to date. Manually clear
your browser's cache (for example, open your browser and choose
Internet Options > General > Browsing history > Delete.) and re-
launch the web-based management page.
If you are experiencing any other issues with the router:
1. Restart the router.
2. Restore the router to its factory settings.
3. Contact your carrier.
To Next Page
Loading...
