Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
34
8 VoIP
The CPE supports voice services based on the Session Initiation Protocol (SIP) and enables
voice service interworking between the Internet and Public Switched Telephone Networks
(PSTNs).
8.1 Viewing VoIP Information
To view the VoIP information, perform the following steps:
1. Choose VoIP > VoIP Information.
2. View the VoIP information, such as the SIP account and status of the SIP registration server.
----End
8.2 Configuring a SIP Server
To set the SIP server parameters, perform the following steps:
1. Choose VoIP > SIP Server.
2. In the User Agent port box, enter the port of the SIP account provided by your service
provider.
3. In the Proxy server address box, enter the address of the proxy server provided by your
service provider, for example, 192.168.1.10.
4. In the Proxy server port box, enter the port of the proxy server provided by your service
provider, for example, 5060.
The value ranges from 1 to 65535.
5. In the Registration server address box, enter the address of the registration server provided
by your service provider, for example, 192.168.1.11.
6. In the Registration server port box, enter the port of the registration server provided by your
service provider, for example, 5060.
The value ranges from 1 to 65535.
7. In the SIP server domain name box, enter the domain name of the SIP server.
If you set Secondary server to Enable, you should set the previous parameters
again.
8. Click Submit.
----End
To Next Page
Loading...
