Huawei E9000 - Page 59

Indicator Status Meaning Diagnosis
O The PSU has no
power input or is
faulty.
1. Check whether
the PSU is
faulty.
2. Check whether
the external
power supply is
normal.
Table 5-9 Network port indicators
Indicator Status Meaning Diagnosis Procedure
Connection status
indicator/Data
transmission
status indicator for
a 10GE optical
port
Steady
green
The network port is
connected properly.
N/A
Blinking
green
Data is being
transmitted.
O The network port is
not connected.
1. Connect the port
to another switch,
optical ber, and
optical module to
check whether the
original switch
and optical
ber
are normal and
whether the type
and speed of the
original optical
module are
correct.
2. Check whether
the ports on the
switch and NIC
are up.
3. Check whether
the NIC is
operating
properly.
Huawei Servers
Troubleshooting 5 Diagnosing and Rectifying Faults
Issue 20 (2020-09-25) Copyright © Huawei Technologies Co., Ltd. 50