Huawei E9000 - Page 62

Indicator Status Meaning Diagnosis Procedure
O The network port is
not connected.
1. Connect the port
to another switch,
optical ber, and
optical module to
check whether the
original switch
and optical
ber
are normal and
whether the type
and speed of the
original optical
module are
correct.
2. Check whether
the ports on the
switch and NIC
are up.
3. Check whether
the NIC is
operating
properly.
Data transmission
status indicator for
the management
network port
Blinking
yellow
Data is being
transmitted.
N/A
O No data is being
transmitted.
1. Connect the port
to another switch
and network
cable to check
whether the
original switch
and network
cable are normal.
2. Check whether
the ports on the
switch and NIC
are up.
3. Check whether
the NIC is
operating
properly.
Connection status
indicator for the
management
network port
Steady
green
The network port is
connected properly.
N/A
Huawei Servers
Troubleshooting 5 Diagnosing and Rectifying Faults
Issue 20 (2020-09-25) Copyright © Huawei Technologies Co., Ltd. 53